DroidTV MX new Firmware released!

DroidTV Wizard for XBMC

Minix X7 8th FW released!


Post Reply 
 
Thread Rating:
  • 10 Votes - 2.6 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DroidTV MX firmware 2014 May
05-29-2014, 06:34 AM
Post: #11
Not Solved RE: DroidTV MX firmware 2014 May
Yes i did... in the end i just extracted the zip and pulled it out that way... P.S i really like then new Droid Tool
Find all posts by this user
Quote this message in a reply
05-29-2014, 06:40 AM (This post was last modified: 05-29-2014 06:55 AM by wozz.)
Post: #12
Not Solved RE: DroidTV MX firmware 2014 May
the download link worked after a few goes and xbmc is definitely in there once installed (I left the sdcard in)

the location in setting advanced says shanghai and no way to set it to UK or any other western place on my mx2

the i8Keypad with touchpad + Remote Control works and the dongle seems to be picked up automatically

showbox and tvportal apps installed and worked ok too , as did cliq , sportsdevil and a few other similar apps

it also streamed ok from my s3 mini using showbox and twonky beam once I had switched a few settings on (for xbmc-wired)

I am getting errors with vidics , 1channel and navi-x though , although these werent working on my july 2013 previous firmware either
Find all posts by this user
Quote this message in a reply
05-30-2014, 09:36 PM
Post: #13
Not Solved RE: DroidTV MX firmware 2014 May
Xbmc not playing video just playing audio.... any ideas?
Find all posts by this user
Quote this message in a reply
05-31-2014, 04:21 AM
Post: #14
Not Solved RE: DroidTV MX firmware 2014 May
check your video settings in system settings in xbmc
Find all posts by this user
Quote this message in a reply
05-31-2014, 11:16 AM
Post: #15
Not Solved RE: DroidTV MX firmware 2014 May
Hi, the download link isn't working...sorry. Please help :-)
Find all posts by this user
Quote this message in a reply
05-31-2014, 03:40 PM
Post: #16
Not Solved RE: DroidTV MX firmware 2014 May
Hi,

Can this FW be used with the Zoomtak M6 box? Specs:

AML8726-MX ARM Cortex A9 800MHz+MaLi-400 GPU
DDR3 1G RAM 8GB

Thanks!

Steve
Find all posts by this user
Quote this message in a reply
06-01-2014, 04:34 AM (This post was last modified: 06-01-2014 04:56 AM by ds2kx.)
Post: #17
Not Solved RE: DroidTV MX firmware 2014 May
hi,

I have one question : This firmware give access to the original android desktop ? Because i have a firmware on my DTV MX where i have only 2 options : 3Dlauncher and media launcher... the android desktop is not accessible.

https://www.dropbox.com/s/a3j9ay72rth56w....28.58.jpg

thanks
Find all posts by this user
Quote this message in a reply
06-01-2014, 07:51 PM
Post: #18
Not Solved RE: DroidTV MX firmware 2014 May
Works really nicely on one of my boxes which I upgraded from a previous androidgadget release, but on flashing another one which was on gbox midnight firmware I ran through the setup fine and it got an IP, configured the display size etc, then left it overnight installing apps and in the morning it was bricked. It won't boot past the androidgadget.co.uk screen. I have tried flashing it again using various different sdcards and images but it won't go past the androidgadget.co.uk boot screen so I can't get it into recovery mode.

Any ideas?
Find all posts by this user
Quote this message in a reply
06-02-2014, 03:50 AM
Post: #19
Not Solved RE: DroidTV MX firmware 2014 May
androidgadget.co.uk THIS PASSWORD IS NOT WORKING CAN U HELP PLEASEHuh
Find all posts by this user
Quote this message in a reply
06-02-2014, 05:13 AM
Post: #20
Not Solved RE: DroidTV MX firmware 2014 May
That password worked fine when I tried it this afternoon
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)